ChillWaves Brass Ball Valve, Air Compressor Ball Valve Shut Off Switch 1/4" NPT Female x 1/4" NPT Female Thread Pipe Fitting(8-PACK)

Ball valves are the components in the pipeline system that play the roles of connection, control, reversal, diversion, sealing, and support.Note that the brass Ball Valve are US NPT standard threads with a 60 degree taper.Product introduction：1. Brass ball valve is mainly used for cutting, distributing and changing the flow direction of medium, with good flow regulation function. NPT female and male threads are hard connections, which typically require sealing.2. It is suitable for gases, water, oil and non-corrosive liquids. It is a valve specially used for pipe connection engineering. Widely used in grease, fuel, refrigeration, water, instrumentation, oil and gas and hydraulic systems. 3. It is evolved from a cock. Its opening and closing part is a sphere, which is opened and closed by rotating the sphere 90° around the axis of the valve stem. 4. The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the joint is stronger after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads. 5. When purchasing ball valves, consider the application as this will affect the material type, shape, size and desired durability. valves are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)PACKAGE INCLUDED:8 x 1/4" FNPT x 1/4" FNPT Ball Valve1 x Teflon tape

• SIZE - 1/4" NPT Female x 1/4" NPT Female Ball Valve. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
• MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
• USE - Brass ball valve is mainly used for cutting, distributing and changing the flow direction of medium, with good flow regulation function.It is a valve specially used in pipeline connection engineering.It is suitable for use with gases, water, oil, and non-corrosive liquids.
• FEATURES - The lever handle is covered with red plastic for manual on/off control.180-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
• NOTE - NPT is a tapered pipe thread with a 60° taper, usually cannot be screwed to the end, this ball valve is not limited by the mounting orientation, the flow of the medium can be any direction.